OUR CABLE PROTECTION SYSTEMS
We Offer a Range of
Equipment to Meet Your Needs
Product OD Range: 25mm to 350mm
Design Bending Moments: In excess of 100 kNm
Design Standard: API 17 L1 / L2
Material Selection: Polyurethane 82°D
Design Life: Up to 30-Years
Installation Method: By-hand/Basic Hand Tools
Patent: Pending
.jpg)
Product OD Range: 25mm to 350mm
Design Bending Moments: In excess of 50 kNm
Design Standard: API 17 L1 / L2
Material Selection: Polyurethane 85°A
Interface Material: S355/SAE 316L/UNS S32750
Design Life: Up to 30-Years
Geometery: Up to 300mm pigtail OD
Design Load: Up to 50t WLL
Design Standard: DNV-ST-0378 (or equivalent)
Composition: Carbon, Stainless Steel, or Poylmeric
Coating: BZP/Wet Paint/Cathodic protection
Installation: Topside
Product OD Range: 25mm to 350mm
Impact Resistance: Up to 20kJ
Design Standard: API 17 L1 / L2
Material Selection: Polyurethane 65°A
Design Life: Up to 30-Years
Banding Material: UNS S32750/UNS N06625/Titanium
J-Tube OD Range: Up to 36”NS
Cable / Umbilical OD Range: Up to 350mm
Design Standard: Industry standard
Material Selection: Polyurethane / Nylon / Metallic
Design Pressures: Up to 10 Bar.G
Designs Types: Diverless / Diver / Active
Sizes: Varying Diameters
Design: Up to 50 year wear protection
Design Standard: API 17 L1 / L2
Material Selection: Polyurethane 55°D
Design options: ROV installable
Bend Radius: To suit project cable/umbilical/flexible
​
Product OD Range: 25mm to 350mm
Design Moments: Up to 150kNm
Design Standard: API 17 L1 / L2
Material Selection: Polyurethane/Nylon/Metallic
Design Life: Up to 30-Years
Installation: Topside
_edited.jpg)
Piggy Back Clamps.
Sizes: Varying Diameters
Design Loads: To suit project specification
Design Standard: API 17 L1 / L2
Material: Polyurethane/Polypropylene/ Polyethylene
Banding Material: UNS S32750/UNS N06625/Ti/Kevlar
Banding Method: Pneumatic or Manual
Product OD: 25mm to 350mm
Design Uplift: ca. 500kg per module
Design Standard: API 17 L1 / L2
Material Selection (Typical):
Buoyancy: Reprocell foam
56 shore D Polyurea with Kevlar/SDSS Strap
Nylon 6 Internal Clamp
Sizes: Varying Diameters
Design Loads: To suit project specs
Design Standard: API 17 L1 / L2
Material Selection: To suit project specs
Design Standard: DNVGL-ST-E273 [or equivalent]
Design Pressure: Up to 3 Bar [where required]
