OUR PIPELINE PRODUCTS
We Offer a Range of
Equipment to Meet Your Needs
Pipeline Plugs.
Pipeline ID Range: Up to 48”NS
Design Pressure: Up to 350 Bar.G
Design Standard: ASME VIII Div 2
Material Selection: Polyurethane/Nylon/Metallic
Protection: NORSOK M-501/Cathodic protection
Installation: ROV/Diver
Diameter Range: Up to 48"ns
Design Pressures: Up to 350 Bar.G
Design Standard: ASME/DNV-RP-F113
Pipeline Material: Carbon/Stainless Steel
End-cap resistance: Structural Collets [Modular]
Installation: Diver/ROV
Verification: Between Seals test ports
J-Tube Seals.
J-Tube OD Range: Up to 36”NS
Cable / Umbilical OD Range: Up to 350mm
Design Standard: Industry standard
Material Selection: Polyurethane / Nylon / Metallic
Design Pressures: Up to 10 Bar.G
Designs Types: Diverless / Diver / Active
Recovery Clamps.
OD Range: Up to 36”NS
Design Load Up to 500t (or more if req’d)
Design Standard: DNV-ST-0378 (or equivalent)
Material Selection: Carbon Steel
Protection: NORSOK M-501 system 7B
Installation: ROV/Diver
Topside/Tether Clamps.
OD Range: Up to 36”NS
Design Load: Up to 500t
Design Standard: DNV-ST-0378 (or similar)
Material Selection: Carbon Steel
Protection: NORSOK M-501 system 7B
Installation: Topside/ROV/Diver
Hang-off Systems.
Sizes: Varying Diameters
Design Loads: To suit project specs
Design Standard: ASME VIII
Material Selection: Carbon/Stainless Steel
Design load: Up to 150t
Design Pressure: Up to 350 Bar.G
Waterstop Seals.
Annulus Range: 4 x 8” to 12 x 18”ns
Design Pressure: Up to 350 bar.g
Design temperature: -20°C to +150°C
Pipeline Material: Carbon/Stainless Steel
Locking design: Self-energising collet
Seal Material: HNBR
Continuity Clamps.
Range: To suit pipeline or interface
Certification: BS EN 10024-3.1/CE Class I
Design Standard: DNV-ST-F101 (or similar)
Continuity: ≤ 0.1 Ω
Material Selection: Carbon Steel
Protection: NORSOK M-501 system 7B
Installation: Topside/ROV/Diver
